Wireless HDMI Transmitter and Receiver,JCHICI Wireless HDMI Extender,Casting 5G,Monitor,Projector.

Transmitter Spec:  
Model: TX  
Resolution: Max 4K@30HZ  
Interface: HDMI  
Material: ABS  
Power: 5V 2A  
WiFi: 2.4G/5G  
HDMI Output Devices : Laptop, PC,Camera   

Receiver Spec:  
Model: RX  
Resolution: Max 1080P @60HZ  
Interface: HDMI & VGA  
Material: Aluminum alloy  
Power: 5V 2A  
Wifi : 2.4G/5G  
HDMI Input Devices: HDTV, Projector   

Installations:  
1. Connect the HD port or VGA port of the receiver to the video input port of the display device such as the monitor or TV.  
2. Connect the USB-C power supply port of the receiver to the charging cable and plug it into the power adapter (5V2A).  
3. Turn on the receiver power switch.  
4. Adjust the HD Signal source of the monitor or TV to the corresponding HD port untithe boot screen is displayed.  
5. Connect the transmitter to the computer or other devices With HD video output function . After the indicator Light enters the fast flash state , wait for ten secs to complete Casting.  

2 Power Modes:  
Mode 1: Take power from the HDMI port of the laptop.  
Mode 2: If the laptop HDMI port does not support power supply or the power supply is insufficient, you can use the Type-C port cable to connect the power supply or the laptop to supply power.  

Warm tips:  
1.The longest distance of smart phone transmission is 3-5m(16ft).  
2.When using, pls don't go through the wall, it will weaken the transmission signal.  
3.Pls don't use it in closed closet,or the receiver will not be able to link with the transmitter.  
4.When using,pls make sure TX's power supply has sufficient power..   

Package Includes:  
1.Transmitter * 1  
2.Receiver * 1  
3.HDMI cable *1  
4.Type C cable *2  
5.User manual * 1